Foiled Blossom - A6 Blossom and Grow Stamp Set

Hi All

Alice here with yet another Monday Morning Blog Post.  I had fun doing this on Kraft Card with the A6 Blossom and Grow and the A6 Leaves from Colourific.  You will find all of their stamps on the Colourific Website here.

Materials Used:

A6 Blossom and Grow Stamps
A6 Leaves
6x6 Kraft Card
5.75 x 5.75 Glitter Card
5.5 x 5.5 Kraft Card
Off cuts of Kraft Card and Glitter Card for Banner
Scrap piece of Velum
Gold Embossing Powder
Wow Bonding Powder
Versa Mark Stamp Pad
Greeting
Gold Gems
Gold Brads

• I stamped the leaves onto the 5.5x5.5 square Kraft Card with Versa Mark Ink and embossed with Gold Embossing powder.  
• Blossom Flower was stamped onto Kraft Card and Embossed with Wow Bonding Powder and then fed through Foiling Machine.  
• Greeting was stamped onto velum and embossed with gold embossing powder.  The velum was torn to make it distressed. I made the banner with the scrap card and attached the velum sentiment with gold brads.
• I layered the card up and then fussy cut the Blossom Flower and attached with foam pads.

Thank you for looking, see you next time 

Take Care

Inked Blossom - A6 Blossom Stamp Set

Hi Everyone

Alice here.  Welcome to my blog post for today.  I have used the A5 Blossom and Grow Stamp set again.  You can find this and many more fabulous stamps on the Colourific Website here

Materials Used:

A6 Blossom and Grow Stamp Set
A6 Borders Stamps
6x6 Card Blank
5.75 x 5.76 Light Blue Card
5.5 x 5.5 Pink Card
5.25 x 5.25 White Card
Black Embossing Powder
Black Versa fine Ink Pad
Blue and Pink Watercolours

• Matted and layered Light Blue and Pink cards onto with card blank
• Lightly sprayed the White Mat with Water and added pink and blue water colours.  Sprayed again with water and let paint run over the card.  Left to dry naturally.
• Stamped the Blossom onto the card and added the little stamps and stems at the bottom, then embossed with Black Powder.  Then added pink watercolour to the blossom head.
• Added the Border stamp along the top and left hand side.
• Stamped Blossom and Grow greeting in the bottom left hand corner.
• Finished off with 3 gems.

Thank you for looking

A Little Note To Say - A6 Leaves Clear Stamp Set

Good Morning

Alice here, hope you are all well and ready for another Monday morning!

A week or so ago, I found a new technique to make a wreath.  You can make your own Build a Wreath template by following tutorials on You Tube.  I knew this technique would work well with the Colourific A6 Leaves Clear Stamp Set.  You can find this stamp set, and many more super stamps  by looking on the Colourific Website here

Materials Used:

A6 Leaves Clear Stamp Set

A6 Camper Van Stamp Set

A6 Border and Stamp Stamp Set

6 x 6 White Card

5.5 x 5.5 White Mat

5.5 x 5.5 Green spotty mat

5 x 5 White Mat

Butterfly Die

Various coloured inks

• Inked the largest mat with sage green ink and the smaller one with lilac ink.  
• Used my stamping platform and my homemade template to make the wreath using various sizes of leaves and flowers.  Using a scalpel I carefully cut out the centre of the wreath.  
• Using the stamping platform, I stamped the border around the edge of the 6x6 card, then layered the largest mat onto the white card.  
• Stamped the sentiment onto white card, cut it out and inked the edges with lilac ink.  I shaped the sentiment using a bone folder and attached it through the wreath, then used foam pads to attach the wreath mat onto the green spotty mat and attached it to the card. 
• Finished off with a die cut butterfly which was inked with green and lilac inks. Finally added small pearls to the card and the centre of the butterfly.

I really liked this card and hope you do too.

Zentangled Blossom - A6 Blossom and Grow Stamp Set

Good Morning, 

Alice here with my DT Card for today.  The open spaces in this card immediately made me think about the art of Zentangle.  I used the following Stamp Sets to create it:-

A6 Blossom and Grow 
A6 Border and Stems 
A6 Leaves

You can find them all here along with many other fabulous and versatile stamp sets. 

To make this I used a 6x6 blank card along with a 5.75 x 5.75 Black Layering Mat and a 5.5 x 5.5. white layer.  I used a stencil and a light grey ink pad to create a soft back ground.  I then stamped the 3 lined border all the way round.  I stamped each flower and several sizes of the solid leaves with black ink and embossed all of them.  I fussy cut out the flowers and used a black fine liner to create the Zen tangle patterns.  I used sticky pads and placed the flower diagonally across the front of the card, then placed the leaves where I thought they looked best.  I attached a crystal gem to the centre of each bloom then finished the card off with a greeting from my stash.

I like the finished card and hope you do too.  Thank you for looking.

See you next time

Alice xx

Build a Wreath - A6 Blossom and Grow Stamp Set and A6 Leaves Clear Stamp Set

Hi everyone, Alice here,  A bit late in getting this on for today, but thought I would post it anyway.  I was having a little browse through some You Tube tutorials on inking techniques, when I stumbled across a fabulous tutorial.  No, it's not what you think, absolutely nothing to do with Inking techniques at all.

It was a tutorial on how to make a "Build a Wreath Template" for a stamping platform.  I studied the tutorial, but way too much measuring for me.  I went to the Scan n Cut and produced my own template using square shapes.  Probably not the best in the world, but it worked for me.

I knew instantly, that this would work well with the A6 Moderne Leaves from Coulourific which you can find here.  I also used some of the small flowers from the A6 Camper Van and A6 Blossom and Grown Sets.

Here are some of the samples I played around with, some are better than others, but I am just learning!!  I have made one into a card which you can see in one of my later blogs.

Vellum Leaf Wreath - DT Member Verity

Hello! So good to be here. It's Verity here from Pretty Little Button with another card for you today. I had a vision of how this card was going to turn out when I started, and I can say, this card is exactly like how I had planned it. When I saw the A6 leaves stamp set from Colourific, I thought they would be perfect for creating a wreath. Whatsmore, pair it with vellum and embossing powder and a beautiful vellum leaf wreath card was created!

Vellum Floral Wreath card details:

Start off by repeatedly stamping the outline leaves from the A6 Leaves clear stamp set in versamark onto vellum. Cover this with white embossing powder and heat set. 

Once you have stamped and embossed enough leaves fussy cut these out. Start arranging the leaves onto a kraft card panel - you may find it useful to draw a faint pencilled circle for guidance. Using strong adhesive, secure the leaves down, overlapping and weaving the leaves for interest.

Add a layered die cut sentiment to the middle of the wreath. I also added a black die cut sentiment at the back, offset to one side to create a shadow. This will help the sentiment stand out from the wreath.

To soften the edges, lightly ink blend white pigment ink and foam mount the card panel onto a square kraft card base. To finish off, add a selection of sequins, scattering them around the wreath. 

I hope you love today's card and don't forget to check out the stamp set, link below. If you loved this card please leave a comment below as we would love to hear from you. 

Colourific.co.uk Shop

A6 Leaves clear stamp set

Until next time!

Verity

Pretty Little Button Blog | Instagram | Facebook | Youtube

Hydrangea ~ Design Team Member, Karen

Hello everyone!  It's Karen posting for you today, and I'm sharing a card that started out as a wreath... but ended up being a hydrangea ( ??? ).  Scroll down for the details...

 I started out by stamping multiples of all three sizes of the outlined flower images from A6 Moderne Flowers, and a bunch of the outlined leaves from the A6 Leaves set on a large piece of watercolour paper.  My intention was to paint them all in autumn shades, fussy cut them out, and put them together to make a wreath.  But there was something about seeing 25 or so of the flower images side by side that made me think "hydrangea".  So my plan did a complete about take, I found a blue that I painted them all with, and got busy cutting.

 I gradually watered down the shade of blue that I was using, making some of the blossoms lighter, and lighter still, as I knew I wanted some to be hidden behind that would be darker, or in 'shadow'.  I used a bright yellow mixed with a bit of green to make up my limey/green leaves, varying the colour a bit on each one.  At first glance it looks like an awful lot of cutting!  But once I got going, it probably only took about 45 minutes - easy to do while you watch a little TV.  I added a dot of silvery Perfect Pearls to the center of each flower, and let them dry.
I ran a couple of rows of irregular stitching around my white cardstock piece, and then started building my flower from the bottom up.  I used a bit of adhesive just on the center of each flower back, so that the petals all curve up a little, giving a lovely bit of added dimension shown below:

By far the scariest part of putting this card together was adding those little blue spatters to the background - after all the work of stamping/painting/cutting/assembling, I was panicked that I might drop a big blob of paint onto my work!  So it was definitely a less is more situation, and I stopped after getting just enough spatters to cover it.  I white embossed my sentiment onto black cardstock and adhered it with a few pop dots, and called it a day.  Happy stamping!

Autumnal Thanks - Design Team Member: Verity

Hello! So good to be here. It's Verity here from Pretty Little Button with another card for you today. This card features stamps from the A6 Leaves clear stamp set from Colourific. This stamp set has a variety of leaves of different sizes and either as the outline or the bold full stamp. I used this stamp today with a masking and emboss resist technique to create a beautiful decorative panel. 

Autumnal Thanks card details:

To start, mask off an area for stamping - this area will be where we add colour later on. Now for this card, I used a stamping platform as I wanted to emboss the leaves where the colour was, and only stamp the leaves outside the colour in a simple ink - this area was not embossed.

Before inking, I prepped the area with an embossing buddy. The stamps were inked with versamark ink and covered in Pure Platinum embossing powder and heat set. Before moving the leaves to stamp in another area, I positioned the panel back into my stamping platform and covered the embossed area with masking tape. I removed the masking that I had originally put down to mask off the coloured area. 

With the stamps still in the same original position prior to embossing, I inked the stamps up with dark grey ink and stamped onto the card panel. I removed the masking paper to reveal continuous stamping between the embossing and the ink.  

I repeated this process of inking and embossing until I had a strip complete. To add the colour. I positioned the masking taped back onto the card cover the ink parts of the stamp and leaving over the embossing exposed. Using a blending tool and distress oxides (Fossilized amber, spiced marmalade and candied apple), I created a gradient embossed resist background. Once you have finished ink blending, removed the tape and buff the embossing with a dry paper towel. This will remove any excess ink left on top of the embossing. 

To finish the card, I added a layered 'Thanks' die cut from my stash and embellished with some colour corresponding sequins. The card panel was foam mounted onto an A6 (UK size) black card with a 1/8" border. 

I hope you love today's card and don't forget to check out the stamp set, link below. If you loved this card please leave a comment below as we would love to hear from you. 

Colourific.co.uk Shop

A6 Leaves Clear Stamp set

Until next time!

Verity

Pretty Little Button Blog | Instagram | Facebook | Youtube

Dream ~ Karen

Hello everyone!  It's Karen with you today, and I have a simple card using 3 different stamp sets to share:

 I started by die cutting a circle shape from a piece of scrap paper to create a mask, then I taped it down on my cardstock and created an ombre/sunset effect using three colours of Distress Oxide Inks (Wild Honey, Worn Lipstick & Candied Apple).  After removing the mask, I stamped the two flowers from the Moderne Flowers set, the leaves and butterfly from the Leaves stamp set, and added the Dream sentiment from Unicorns & Chasing Rainbows - all in Black Versafine ink.  I drew in the stems with a fine black marker.

I used my sewing machine to stitch the panel down to some black cardstock, and popped the whole piece up with some pop dots before adhering it to my patterned paper.  I added a few white sequins to finish it off.  You can find all of the stamp sets on the Colourific website here... or click on the stamp names above to go directly to them on the site.  Happy stamping!

Rambling Flowers & Leaves card

I made this card which was inspired by a video I watched by Jennifer McGuire

Used stamp sets A4 Alphabet & Numbers, A6 Leaves and A6 Moderne Flowers

The stems and centre of leaves were hand drawn with a fine liner to finish